/******************** (C) COPYRIGHT 2006 STMicroelectronics **********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 11/27/2006  : Version 1.0
* Description        : Description of the Timer to Memory DMA example
**********************************************************************************
* History:
* 11/27/2006  : Version 1.0
*********************************************************************************
 THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
 CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
 AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
 OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
 OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
 CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
**********************************************************************************

Example description
===================

The following example shows how to use the TIM peripheral to measure the frequency 
and Pulse width of an external signal.TIM0 is configured in PWM input mode, each 
Input Capture1 event we are going to transfer Registers ICR1 and ICR2 to memory.

Directory contents
==================
91x_conf.h  Library Configuration file
main.c      Main program
91x_it.c    Interrupt handlers
Readme.txt   This file.

How to use it
=============
In order to make the program work, you must do the following :
- Create a project and setup all your tool chains start-up files
- Compile the directory content files and required Library files:
  + 91x_lib.c
  + 91x_dma.c
  + 91x_scu.c
  + 91x_TIM.c
  
- Link all compiled files & load program into the Flash.
- Run the example


******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****
